RINNAI INFINITY 28i INTERNAL METHANE GAS WATER HEATER COMPLETE WITH SMOKE EXHAUST KIT

Overview

NEW RINNAI INFINITY 28I INTERNAL METHANE GAS WATER HEATER Cod.REU-VCM2837FFUD-NG, 2 - FORCED DRAFT Sealed Chamber Water Heaters, COMPLETE WITH SMOKE EXHAUST KIT - ErP Energy class A

Technical specifications

Energy label specifications according to the European ErP directive

DHW sanitary energy efficiency: Class A

Load profile declared: XL

Electricity consumption (kWh/annum) and fuel (GJ/annum) 8 - 18

Internal noise level (dB) 67

Heating/DHW operation characteristics:

Code: REU-VCM2837FFUD-NG

2 - Flow-forced sealed chamber water heaters

Electronic ignition without pilot flame

Can be combined with: solar panels/recirculation/accumulmax 1000 lt

Antifreeze fine series -20C

Installation: Internal - Villa - Apartment with multifunction/hydromassage shower and professional installations

Dimensions: 582x356x235 mm; 20kg

Methane heat output Min/Max (kW) 2.8/53

Water flow rate t 25C Max (l/min) 28

Max operating temperature (C) 85

Min activation pressure (bar) 0.1

Nominal operating pressure Min/Max (bar) 2.5/10

Electrical consumption normal / stand-by / antigel (W) 97 / 2 / 120

METHANE version

Main features

RINNAI GAS WATER HEATERS: INFINITY saves infinite comfort

Rinnai Infinity is the line of GAS* instantaneous water heaters, with forced flow and alternation, for professional indoor and outdoor domestic appliances, capable of guaranteeing:

Unlimited hot water without temperature changes

Gradual temperature selection using the standard remote control

energy saving

Simplicity of design and installation

Compact size

Superior performance and absolute safety

Furthermore, thanks to its unique characteristics, the external range ensures total protection from:

Vent(up to 90 km/h)

Water coming from every direction (even horizontally, with IPX5D protection factor)

Corrosion and rust, with the enamelled galvanized steel shell

Frost, thanks to the standard antifreeze on all appliances (including internal ones)

The SERIES remote control allows the user to select the desired water temperature with precision to the degree, directly from the point of use (when the tap is opened).

RESULT:

no need for mixing for maximum COMFORT and absolute PROTECTION from the risk of burns.

energy saving: Rinnai Infinity eliminates any unnecessary waste and ensures real savings:

Gas operation guarantees significantly lower costs than electric operation.

Compared to a traditional kettle, subject to heat losses and energy consumption to constantly heat the water, Infinity produces it instantly at the moment of actual request and exactly at the desired temperature.

The advanced technology of the continuously modulating gas valve, which regulates combustion with maximum precision, guarantees a more efficient and cleaner regime, with a consequent cut in consumption and polluting emissions.

The detection of the inlet water temperature also allows Infinity to work in perfect synergy with solar systems, thermocookers and other thermal generators, modulating, solquandserve and solquantserve, to reach the set temperature

Domestic Range: Superior performance in small cuts

The wide domestic range, differentiated into various hydraulic flow rates, allows the user to choose the appliance suited to their needs. The compact dimensions and captivating aesthetics also guarantee a harmonious and discreet installation, both inside and outside the home

INFINITY 28i

NEW INFINITY 28 INSTANTANEOUS GAS WATER HEATERS

Infinity 28 Interng is a professional range of instant domestic hot water producers for internal installation with electronic temperature management and water flow control. Anti-corrosion enamelled zinc steel casing and standard electronic control with temperature management and self-diagnosis function. Maximum operating temperature equal to 85 C.

Comfort and Economy

The new Rinnai Infinity 28i and 28e water heaters (codes REUVCM2837FFUD for internal REU-VCM2837WD for external) have the ability to manage an external circulator (optional) in domestic systems equipped with a domestic hot water recirculation ring, to immediately provide hot water in the places of use, according to two operating modes:

"Economy" (factory setting) which aims to maximize consumption savings thanks to less frequent switching on of the pump, at regular time intervals of approximately 30 to 70 minutes.

"Comfort" which guarantees maximum well-being even in systems where poor insulation of the water circuit is assumed, therefore greater heat losses, with more frequent pump switching cycles, at intervals of approximately 15 to 30 minutes.

Antifreeze

Series antifreeze system (also on indoor appliances) up to -20C.

State monitor Control panel

The Infinity 28 features a status monitor on the front panel, which displays operating temperature and fault codes. Up to 4 remote controls can be connected to the device (including one on the dashboard for the internal model) offering the following options:

temperature control directly from the room of use

self-diagnosis

additional functions with "de luxe" controls for kitchen bathrooms

Cascade connections

In addition to the previous cascade appliance management and control systems (REU-MSB-MB cards), the new Infinity 28 are equipped with a connector for connection to a Building Management System (REU-OPU) which allows remote error signals.

ERP

Rinnai's commitment to a sustainable future. For this reason, all our products are "ERP Ready", i.e. in line with the European classification legislation in force since 26 September 2015. ErP, acronym for Energy related Products (products connected to the use of energy), identifies Directive 2009/125/EC aimed at reducing the energy consumption of products through eco-friendly design.

The Directive establishes very precise reference points for the manufacture of eco-compatible products and defines the mandatory minimum requirements for energy and environmental performance for energy-consuming instruments.

The goal is to reach the famous 20-20-20 by 2020. This repetition of the number 20 serves to more easily remind everyone of the three central focuses:

-increase the energy efficiency of energy-consuming machines by 20%

-reduce carbon dioxide (CO2) emissions into the atmosphere by 20%

-achieve a percentage of renewable energy on final consumption of 20%

From 26 September 2015, appliances for winter air conditioning and the production of domestic hot water are accompanied by an energy label.

ELD directive: all clear label

The European Union has made the new energy labeling system mandatory to allow consumers to immediately understand the level of environmental compatibility of individual products. The ELD Labeling Directive (2010/30/EC) in fact requires that each item subject to the ErP Directive is equipped with a label to highlight not only the energy efficiency class but also other performances such as sound power, use, thermal power.

Rinnai actively participates in these adjustments, happy to make its contribution to an eco-sustainable world

Warranty

All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

• peso: 23.0 kg
• costospedizionecad: IT25;AD113;AT73;BE75;BG88;HR89;DK125;EE122;FR94;DE63;LV94;LT88;LU59;NL68;PT82;CZ66;SK73;SI74;ES75;SE131;HU56;CH135;
• gas: Methane
• litri: 28
• marca: RINNAI
• modello: Infinity 28i Metano