Sometimes you may notice that the washing machine doesn't drain water at the end of a wash cycle, but before getting upset and calling a technician, it's best to stay calm and check some possible causes of the blockage which don't necessarily require the presence of a specialized professional.
In fact, if the washing machine works, the drum spins, and the detergent is loaded adequately, there's no need to worry. immediately.
There aren't many reasons why your washing machine won't drain water, actually, and they're often trivial, like a clogged drain hose or filter. Of course, it could also be a more complex problem, but our advice is to proceed step by step and eliminate the problem by starting with the simplest hypotheses.
So, let's see together what to do if the washing machine won't drain water, before giving up and contacting a specialized technician.
In many washing machines, a small sock or other item of clothing can fit between the laundry tub and the external water reservoir. If this happens, they can enter the drain hose connected to the filter or even the filter itself.
Whatever the reason, the water will need to be drained from the washing machine before any work or diagnosis can be performed.
Therefore, turn off the washing machine by first pressing the on/off button and then unplugging it. data-mce-fragment="1"> Turn off the water supply tap. At this point, you will need to proceed step by step, in order to identify the possible impediment that is preventing the washing machine from draining water. The most likely cause of your washing machine not draining water is a clogged pump filter. We recommend cleaning it periodically, at least every couple of months, regardless of whether or not there are any problems. In this regard, we invite you to read our article How to clean and disinfect your washing machine. washing machineHow to empty a washing machine that won't drain water
1. Check if the pump filter is dirty or clogged
The filter is installed to capture foreign objects, such as buttons or coins, and prevent them from entering the drain hose. Typically, it's located in the lower right corner of the washing machine, inside a small door.
To clean the pump filter, all you have to do is open the lid to expose the filter. Some washing machine models have a small tube stuck behind the lid to drain the water inside the filter. Others, however, simply drain the water when the filter is removed. In both cases, it's a good idea to place a bowl or towels under the filter to avoid wetting the floor.
If there is a tube, remove it, remove the plug, and let the water drain into a bowl. If, however, your washing machine does not have this tube, then you must empty the filter by turning it counterclockwise to remove it. Be careful, because excess water will start to come out as soon as you unscrew it, so, as mentioned above, prepare a rag or towel.
At this point, remove any dirt, hair, or foreign objects from the filter, rinse it under running water, and inspect the filter cavity to see if anything is stuck inside. Wipe it with a damp cloth. Finally, replace the filter (and the tube, if present) and close the door.
2. Check if the drain hose is kinked or clogged
The hose between the washing machine and the drain must not be kinked or clogged. So, after checking and cleaning the filter, you need to check the drain hose to see if it is clogged or kinked, thus creating a blockage that prevents the water from draining properly and remaining in the drum.
If you have a wall drain, then you will need to disconnect the drain hose from the fitting. data-mce-fragment="1"> Check that there are no foreign objects inside, position it so as to avoid excessive bends, and reconnect it.
At this point, you can try restarting the washing machine and see if it drains the water or not, perhaps by pouring the water into a bucket or tub to check the flow and check for any debris. or detergent residue or external elements that are clogging the pipe.
If everything goes well, you can put the drain pipe back in place and relax, because it means the problem is solved.
3. Contact a technician
If, however, these two steps just described do not solve the problem, and your washing machine still won't drain water, then it's time to contact a specialized technician.
The causes of the malfunction may be different from those you've independently evaluated so far, making a more accurate and professional diagnosis necessary, which only an expert can perform.