Immergas VICTRIX SUPERIOR 35 PLUS Condensing Boiler Methane/LPG Heating Only Complete with fume exhaust kit

Technical features

• Model: Victrix Superior 35 Plus
• Product code: 3.033011
• Fuel: Methane/LPG

Performance

• Minimum nominal heat input: 2.2 kW
• Maximum nominal heat input: 32.8 kW
• Minimum useful thermal power: 2.1 kW
• Maximum useful thermal power: 32.0 kW
• Useful thermal efficiency at 100% Pn (80 / 60 °C): 97.5%
• Useful thermal efficiency at 100% Pn (40 / 30 °C): 104.2%
• Minimum gas flow to the burner: 0.23 m ³ /h
• Maximum gas flow to the burner: 3.60 m ³ /h
• Weighted CO : 26.0 mg/kWh
• NO _X weighted: 30.0 mg/kWh
• Heating energy efficiency class: A
• NO _x class: 6
• Minimum available intake/exhaust head: 2 Pa
• Maximum available intake/exhaust head: 281 Pa
• Nominal heating expansion tank capacity: 10 litres
• Electrical protection degree: IPX5D

Dimensions and weight

• Dimensions (HxWxD): 745x440x389 mm
• Empty weight: 37.3 kg

Immergas Victrix Superior 35 Plus Wall-mounted instant condensing boiler with Aqua Celeris and for heating only

New design, hi-tech electronic board, hydraulic performance and excellent comfort for replacing obsolete boilers . The new VICTRIX SUPERIOR condensing boilers have powers of 26 and 35 kW in the instantaneous versions and 35 kW for the room heating only version. In particular, the instant versions guarantee immediate delivery of domestic hot water thanks to the "Aqua Celeris" system.

Efficiency and attention to the environment

The very wide modulation range guarantees high efficiency, while the low consumption circulator and condensing module with large section coil reduce the risk of clogging. The ecological class of VICTRIX SUPERIOR is 6: the best for low harmful emissions.

Easy installation

All models can vent fumes to the wall and the standard flap allows for combination with positive pressure collective fume evacuation systems . VICTRIX SUPERIOR can also be installed outdoors in protected places. The hydraulic connections are identical to the previous models and the connection group is standard to facilitate installers in replacements. The VICTRIX SUPERIOR are all equipped as standard with a magnetic cyclonic filter .

The VICTRIX SUPERIOR boiler can achieve a higher energy classification (A+), if combined with an advanced Immergas thermoregulator such as the SMARTECH PLUS or the CARV2

Maximum flexibility

VICTRIX SUPERIOR boilers have obtained Hydrogen Ready certification . The new VICTRIX SUPERIOR can now operate with a single code on methane, LPG, propane air and a mixture of up to 20% hydrogen .

Hydrogen The solution to reduce CO2 and greenhouse gas emissions into the environment

While natural gas emits carbon dioxide into the atmosphere when burned in a boiler, hydrogen does not. Since a large part of carbon dioxide emissions are due to the heating industry, this new technology can be a key weapon in the fight to reach zero carbon dioxide emission levels.

To give an idea of ​​the environmental advantages, consider that the introduction of the 20% hydrogen mixture worldwide would save around 6 million tonnes of carbon dioxide emissions per year and the reduction of greenhouse gases by 7 % . If the boilers were completely powered by hydrogen, the results would be extraordinary.

Formula Comfort 10

It takes advantage of the most complete maintenance program lasting 10 years without activation costs , with the possibility of extending it up to 15 years . In collaboration with the Immergas Authorized Assistance Centre, it can be activated during the initial check

Installation modularity

Set up for independent or cascade operation, it can be installed in a series of up to 3 appliances in combination with the relevant optional kits (cascade boiler management kit; cascade and zone regulator, manifold kit with INAIL approved 2.7 bar safety valve)

The PLUS versions have a 10 liter sanitary expansion tank and are approved for outdoor use in partially protected places.

Magnetic cycloidal filter as standard

Magnetic cyclonic kits are filters that combine the so-called "cyclonic" effect (separation of impurities through circular movement of water) with the magnetic effect obtained through a bar containing permanent magnets which is located in a central position and which retains the ferrous particles which they are found suspended in water. VICTRIX SUPERIOR has the magnetic cyclonic filter as standard , to be mounted on site. It is positioned on the system water return and is complete with 2 shut-off valves which allow the magnet to be removed, emptying the water contained in the filter itself without emptying the entire system.

Primary exchanger in stainless steel

The primary exchanger that equips the VICTRIX SUPERIOR is made with a single-tube exchange coil in stainless steel . The absence of collectors and circuits in parallel guarantees maximum reliability over time : there are no solderings.

The single stainless steel spiral without bottlenecks allows for a perfectly balanced hydraulic circuit, significantly reducing pressure losses . The internal section, large and constant, allows you to limit deposits, reducing the risk of clogging in the event of impurities present in the water, for example in the case of replacing boilers on dated systems. Due to this peculiarity, VICTRIX SUPERIOR are ideal for replacement .

New and elegant design, Hi-TECH electronics

Equipped with dashboard closing door and large display always in view, backlit touch buttons and comfortable knobs for making adjustments. The display is well lit and readable and the touch keys have excellent tactile feedback, in line with the high quality level of the product. In addition to the button lighting, the board is equipped with an acoustic signal capable of audibly highlighting the commands carried out by the user on the buttons. The hi-tech electronics make numerous new functions available such as the possibility of managing 3 zones directly from the boiler dashboard or the convenience of setting 4 comfort time bands and 4 calendars, for programming the system and DHW zones .

The evolution in thermoregulation

Systems with multiple zones

Equipped as standard with latest generation electronics , it is possible to manage 3 zones with the aid of wireless room probes and concentrator, both optional. The setting of room temperatures and operating time slots takes place directly from the boiler dashboard or remotely via app (from phone, tablet or PC) with the help of the optional DOMINUS interface kit . It is designed for combination with Theben gateway (not supplied by Immergas) for home automation management using the KONNEX protocol. In particularly large single-family villas, the management of the system can be entrusted to the DIM ErP system circuit breaker kit . The lower casing of the boiler is designed for fixing both the room probe concentrator and the DOMINUS interface card, making the kit assembly operations easier for the installer.

Single-zone systems

These applications can be managed easily through SMARTECH PLUS (with relative app for remote control), or with CARV2 (both optional).

Product guarantee: All products on sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

• peso: 35.0 kg
• classe energetica riscaldamento: A
• gas: Metano/Gpl
• marca: IMMERGAS
• metri quadri : 160
• modello: VICTRIX SUPERIOR 35 PLUS
• potenza in kw: 33
• potenza nominale: 33
• superficie riscaldabile mq: 160