BERETTA CIAO GREEN 29 CSI CONDENSING GAS BOILER COMPLETE WITH LPG SMOKE EXHAUST KIT - NEW ErP Split smoke kit

General characteristics

HELLO GREEN ErP

Ciao Green: high energy efficiency, reduced gas consumption and low emissions.

The entry into force of the European ErP Directive (26.09.2015) provides that generators for the production of heating and domestic hot water are also classified through the appropriate energy label indicating the class. Mandatory labeling provides greater transparency on the characteristics of products which can be easily compared, helping the user to search for those with greater efficiency. Consequently, even with boilers it will be easier to contribute to achieving the "20-20-20" objective set for the year 2020 which consists of: reducing greenhouse gas emissions (CO2) by 20%, increasing by 20% the use of renewable energy and reduce energy consumption in EU countries by 20%.

Condensing exchanger

Beretta's innovative compact aluminum condensing exchanger is assembled with a brazing production process in a controlled atmosphere. In addition to allowing for more uniform heat distribution, aluminum offers high resistance to corrosion for the benefit of greater durability over time.
Aluminum is also chosen for its lightness, excellent conductivity, mechanical resistance, reliability and recyclability.
The condensing exchanger allows a good part of the heat from the fumes to be recovered, reducing losses in the chimney, and a good part of the latent heat, reaching a four-star energy efficiency value (according to European Directive EEC 92/42).
The premix burner optimizes the combustion mixture by reducing NOx emissions to values ​​that place the boiler in Class 5, the highest according to the European Directive EN 677.

Universal installation

Ciao Green is designed to also be installed outdoors in partially protected places or recessed thanks to the dedicated accessories and the board's antifreeze protection up to 0 °C. In colder temperature conditions it is possible to extend the protection down to -10 °C by using the appropriate antifreeze resistor kit together with the siphon antifreeze resistor kit. If the boiler is installed outdoors, without a built-in installation, the lower cover is required for greater protection.

The management

The electronic panel is the brain of boiler management. Simple and intuitive, it allows you to adjust the boiler parameters and activate the numerous functions. A liquid crystal display and LEDs provide information on the status of the device and diagnostic codes. By turning the knobs you can easily and intuitively set the temperature of the heating water and domestic hot water. The panel integrates the Friendly Climate System function.

Characteristics:

• ErP boilers with low energy consumption modulating synchronous circulator (EEI≤0.20)
• Designed according to the ecodesign indications provided for by the European ErP Directive
• Energy Class > heating (class A) > sanitary ware XL profile (class A)
• Seasonal heating efficiency 93%
• Aluminum condensing exchanger, two versions of 25 kW and 29 kW combined and one 25 kW heating only
• Designed following the ecodesign indications of the European ErP Directive
• Class 5 according to European Standard UNI EN 483
• Can also be installed outdoors and recessed using specific kits (optional)
• Display for viewing temperature and diagnostic codes
• IPX5D electrical protection degree
• Prepared for connection to remote control (optional)
• Thermoregulation as standard (external probe optional)
• Hydraulic fittings, gas and sanitary taps (optional)
• Antifreeze kit available up to -10°C (optional)

Beretta is “ERP”. The concrete commitment towards an eco-sustainable future

The acronym ErP, an acronym for "Energy related Products " , identifies Directive 2009/125/EC aimed at reducing the energy consumption of products through eco-friendly design. Starting from 26 September 2015 , the date of its effective entry into force in the European Union, it will mark an epochal turning point for heating products and the production of domestic hot water. Furthermore, on that date other regulations issued at the same time for the energy labeling of products will also become effective, integrating the corresponding Directive 2010/30/EU.

The regulation provides that all products intended for heating and the production of domestic water with a nominal thermal power lower than or equal to 70 kW can only be placed on the market with an energy label that highlights the *efficiency class . Different energy efficiency labels have been provided based on the different types of appliance/technologies, but they all have the same graduated color scale which identifies the various efficiency levels at a glance. The purpose of the labels is to give the consumer the possibility of easily identifying the level of efficiency of a product and being able to carry out a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as heat pumps, the efficiency data is reported by climate band.

In addition to product labels, the European regulation provides for the creation of a system label if systems are created with different devices, components and related controls. This second type of labelling, thanks to the virtuous synergy between the different elements, will give the possibility of creating systems capable of reaching levels of efficiency even higher than those of the individual devices. Also starting from the same date, new seasonal efficiency limits will come into force for products intended for heating and combined heating. These, for products with a nominal thermal power equal to or less than 400kW, will prevent the placing on the market of less efficient products. The obligation to respect minimum heat dispersion limits will also be triggered for DHW tanks. For primary water tanks, these will be subject to compliance with an energy classification based on heat dispersion. For sanitary storage, up to 500 liters will be required to label, from 500 to 2000 liters will be required to comply with the energy classification. For heat pumps for heating and for mixed appliances, in addition to the seasonal efficiency limits, specific noise emission limits will be established for power sizes. Even water heaters, be they gas, heat pump or solar, in order to be placed on the market, in addition to energy labelling, will have to comply with a series of requirements in terms of efficiency.

Product Warranty: All products on sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

• peso: 35.0 kg
• classe energetica produzione acs: A
• classe energetica riscaldamento: A
• gas: LPG
• marca: BERETTA
• metri quadri : 180
• modello: CALD_267G
• potenza in kw: 29
• potenza nominale: 29
• superficie riscaldabile mq: 180