BIASI INOVIA COND E 25S CONDENSING GAS BOILER COMPLETE WITH METHANE FLUE EXHAUST KIT - NEW ErP Split flue kit, methane

Overview

BIASI INOVIA COND E 25S METHANE CONDENSING BOILER - NEW ErP, SEALED CHAMBER COMPLETE WITH SMOKE EXHAUST KIT: Wall-mounted condensing boilers. The premixed range, simple on the outside and technological on the inside.

The sites displaying the Biasi web sales authorized brand have been authorized by BSG Caldaie a Gas SpA for the sale of Biasi products.

These companies therefore issue the conventional guarantee.

Technical specifications

o Model: Inovia Cond E 25S

Energy label specifications according to the European ErP directive

o Class A heating energy efficiency

o Class A sanitary energy efficiency

o Withdrawal profile: XL

Heating/DHW operation characteristics:

o Useful DHW heating power: 24.4 kW

o Useful heating thermal power: 19.5 kW

o Nominal heat input(*) kW: 25 kW

o Efficiency at 100% load: 106.2%

o Sanitary flow rate t =25°K: 15.9 l/min

o High yields (compliant with yield directive 92/42 EEC and Legislative Decree 311/06)

o Sanitary comfort (EN 13203)

o Total premix burner, made of stainless steel (NOx Class 5)

o Sanitary stainless steel plate exchanger

o High efficiency pump with low energy consumption

o IPX5D protection rating

o Dimensions hxwxd: 700 x 400 x 290 mm; 32kg

o METHANE fueled

Main features

Inovia Cond E

Wall-mounted premixed condensing boilers

Inovia Cond E represents the new BIASI premixed condensing boiler. Inovia Cond E has an innovative aesthetic and a new interface that is immediate and simple to use, and is equipped with new functions that make it an integral part of a system and which facilitate installation and maintenance. Inovia Cond E offers all the advantages of condensation technology: great performance, high efficiency, energy saving and respect for the environment thanks to reduced polluting emissions such as NOx and CO.

Installed in low temperature systems they allow savings of up to 30%.

Characteristics:

or • High yields (compliant with yield directive 92/42 EEC and Legislative Decree 311/06)

or • Sanitary comfort (EN 13203)

or • Primary condensing exchanger in stainless steel with plastic coating to offer maximum resistance to corrosion

o • Total premix burner, made of stainless steel (NOx Class 5)

or • Stainless steel plate DHW exchanger

or • High efficiency pump with low energy consumption

or • IPX5D protection rating

or • Can be installed in a partially protected place

or • Integration with BIASI solar systems, using a solar kit

or • Innovative digital control panel with graphic interface and keys

or • Digital pressure reading via pressure transducer

or • Provision for remote control and external probe

or • Possibility of managing a zone valve via remote control in the case of multi-zone systems.

Control panel:

o Summer/winter/off selector

o Heating temperature regulator

o Domestic hot water temperature regulator

o Digital pressure reading

o Viewing domestic hot water temperature and heating on the display

o Display of fault diagnostics, lockout status and fault history

o Recommended filling display and filling guide

o Display months remaining until the annual maintenance is due

o External temperature display (with external probe connected) and signaling of external probe connected and K value set

o Flame modulation display

o Display of BIASI SOLCONTROL solar control unit connected to Inovia Cond E, active solar pump and solar integration

o DHW comfort function selectable via dedicated and programmable button

o Direct entry to the INFO menu dedicated to the user.

Fiscal detraction

As a condensing boiler, Inovia Cond E allows you to benefit from the tax deduction according to current legislation. D

Thermoregulation

By connecting the external probe (optional) directly to the boiler you can take advantage of climate regulation. Inovia Cond E will adapt the system water temperature to external climatic conditions, ensuring the desired room temperature is reached without waste and optimizing consumption. The boiler is equipped with a complete set of curves which can be accessed when entering programming. The curve is simply chosen from the control panel.

Solar management

Inovia Cond E integrates solar management directly within the product. Thanks to the integrated solar management it is possible to connect the SOLCONTROL control unit and view the status of the pump and the relative solar integration.

Zone management

Inovia Cond E features the zone management card as standard which allows you to manage a zone valve using the BIASI remote control. In the case of a system with multiple high temperature zones, one zone can be managed by remote control and the other zones can be managed by chronothermostats. This allows you to select two thermoregulation curves, one in the boiler and the other in the remote control. All the zones controlled by chronothermostats will be managed by the thermoregulation curve set in the boiler, the zone controlled by the remote control will be managed by the thermoregulation curve set therein. In the case of systems with multiple high and low temperature zones, we recommend using the BIASI MULTIzone system manager.

All ready for Energy Labeling

What is it about?

From 26 September 2015 the European Commission directives regarding eco-design and energy labeling will apply.

These two directives aim to achieve savings in one of the most polluting and energy-intensive sectors: construction

For placing on the European market, the Eco-Design Directive (ErP known as « Energy Related Products ») imposes a minimum energy efficiency for heating and hot water production devices in domestic premises. The directive applies to:

or generators with a capacity of less than 400 kW

or water heaters with a capacity of less than 400 kW,

or kettles with a capacity of less than 2000 litres

As in the household appliances sector, the energy labeling of products with a capacity of less than 70 kW will give consumers simple, recognizable information that allows comparisons on the performance and energy consumption of the product they wish to purchase.

The energy label will be included in all boilers, water heaters and kettles placed on the market from 26 September 2015.

Does it affect me too?

YES, it concerns everyone: professionals and end users

The information indicated on the energy label will allow professionals to recommend the right product and individuals to benefit from the information available.

The user will be able to easily compare the performance of the products.

From 26 September 2015, the label will be present on the following products: boilers, electric water heaters, thermodynamic water heaters, solar water heaters, storage tanks, heat pumps, solar systems and control systems.

Supplier responsibility

The company that supplies the product on the market is required to equip its equipment or systems with the following documentation:

o product energy label;

or product technical data sheet;

o system energy label in addition to the product one, both if it sells a system that includes the product in question, and if this, in the future, can be sold combined with other additional devices;

or system technical data sheet with the parts relating to the product or system already filled in.

o Responsibilities of retailers

It should first of all be clarified that the reseller can be anyone who sells, rents, offers for rent/sale and displays an appliance and/or system to the public. Therefore, even professionals such as plumbers, installers or designers can fall into this category. Everyone is required to ensure that:

o all devices and/or systems are equipped with the respective labels and ensure that they are clearly visible;

o all devices and/or systems are always accompanied by the mandatory technical data sheets;

or any type of advertising, promotional or technical material showing energy data or price indications contains an indication of the energy efficiency class.

The new ErP regulations

ENERGY LABELING:

Appliances for space heating and hot water production must be equipped with the new energy label which will report the energy class and main performance data. The energy class must also be cited in the technical, commercial and advertising documentation of the appliances.

ECODESIGN (ErP):

The new ErP regulations impose the minimum energy efficiency that space heating and hot water production appliances must achieve to obtain the CE mark and be marketed in Europe. These new limits will exclude obsolete technologies from the market, significantly raising the level of energy efficiency of products.

PRODUCT LABEL

Depending on the type of appliance, there are different labels. Those with efficiency classes A, A+ and A++ certify the products with the highest performance. Furthermore, two different classifications are envisaged for domestic heating and for the hot water production service, so much so that mixed products must show both classifications. The labels contain, in addition to the energy class, other information, so that the end customer can make his choice in the most informed way possible.

SYSTEM LABEL

In addition to the product label, a system label is also provided if a series of combined equipment is offered. This label must also be included in the technical and commercial documentation of the system. Whoever proposes such systems will have to calculate the performance using a predefined calculation algorithm and display the label in order to inform the end user in the best possible way.

Warranty

All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

• peso: 35.0 kg
• classe energetica produzione acs: A
• classe energetica riscaldamento: A
• gas: Methane
• marca: Biasi
• metri quadri : 150
• modello: INOVIA COND E 25S METANO
• potenza in kw: 25
• potenza nominale: 25
• superficie riscaldabile mq: 150