ARGO condensing BOILER mod. CONDENSY SMART PLUS 24 kW complete with fume kit Split fume kit

ARGO condensing BOILER mod. CONDENSY SMART PLUS 24 kW complete with flue kit

---

• Heating/DHW energy efficiency class: Class A
• Load profile: XL
• Nominal DHW/heating heat output: 24./20.6 kW
• Nominal domestic hot water heat output: 24 kW
• Expansion tank water capacity: 8 litres
• Domestic water production ΔT 25°C: 13.8 l/min
• Minimum water flow rate of the domestic hot water circuit: 2.0 l/min
• Nominal electrical power: 85 W
• Degree of protection: IPX5D
• Fuel: Methane

---

ARGON

The new range of Condensy Plus 24-33 boilers is made up of 2 models with instant domestic hot water production. It was designed above all to be used in case of replacement with an old generation boiler. Everyone is aware of the advantages of condensation technology, i.e. high combustion efficiency and consequently energy savings and above all very low polluting emissions.

1:7 Very high modulation

Greater efficiency given by a reduced number of switching on and off, the high modulation ratio in fact allows a significant reduction in consumption of up to 10% and consequently an equal reduction in polluting emissions. The adjustment of the thermal power with respect to the dissipated power also prevents the generation of excessive overheating/cooling of the rooms.
GAC system

Condensy boilers are equipped with an innovative electronic management system which, thanks to the new electronics and the new electronic gas valve, guarantees automatic combustion control to maximize consumption containment during all operating periods. The advantages are:

• No manual intervention
• Reduced measurements, calibrations or nozzle changes
• Self-adaptation to the quality of the gas and the length of the flue gas exhaust pipes to keep the efficiency constant
• The boiler regulates itself to reduce gas consumption and pollution thanks to the constant control of emissions

Digital control panel

In the new Condensy Plus, there is a digital control panel with a backlit LCD display, very intuitive and simple to use thanks to the symbols silk-screened on the keys. The display shows all the information and settings of the operating parameters clearly and directly.
2-speed modulating pump with de-aeration

The Condensy Plus circulation pump can operate at maximum, minimum speed or "automatic": in the latter case, the speed (min./max) will be determined by the electronics which will have the task of keeping it constant at 20 °C the delivery/return ΔT in heating, ensuring a significant reduction in pump consumption and also in its maintenance costs, due to the lower mechanical stress of a "normal pump" which always operates at maximum speed. When you turn on the boiler for the first time, you can use the semi-automatic de-aeration function: by pressing the 2 buttons for a few seconds, the function which allows the elimination of the air present in the heating circuit is activated. This avoids any blockages of the boiler, overheating of the system and mechanical failures. The electronic board will activate an on/off cycle of the pump lasting 10 minutes. The function will automatically stop at the end of the cycle.

Condensy Smart Plus

Wall-mounted boiler with instant condensing domestic hot water production

• Digital control panel with backlit LCD display
• Wide 1:7 modulation range; greater efficiency for less switching on and off
• Automatic combustion control to constantly maintain maximum efficiency values ​​- GAC (Gas Adaptive Control)
• Complete soundproofing of the generator
• Climatic regulation as standard (with external probe available as an optional)
• Predisposition for connection to a zone system
• Predisposition for integration with solar system
• Pre-mix burner in AISI 316L stainless steel
• Water/fume exchanger in AISI 316L stainless steel, with integrated condensate collection tray
• Modulating fan with electronic speed variation
• Electric three-way diverter valve
• Oversized stainless steel DHW exchanger which facilitates condensation even in DHW operation
• Automatic by-pass
• Low consumption circulation pump and built-in deaerator
• 3 bar heating circuit safety valve
• Turbine flowmeter for greater comfort for domestic hot water production
• Safety thermostat against overtemperatures of the water/fume exchanger
• Safety thermostat against overtemperatures of the water/fume exchanger
• Water circulation safety hydraulic pressure switch
• NTC safety probe against fume overtemperatures
• Temperature control with NTC probes
• Total anti-freeze device
• Pump and three-way valve anti-blocking system that intervenes every 24 hours
• Pump post-circulation lasting 3 minutes which is activated in the heating function and after the main burner has been switched off due to the intervention of the room thermostat.
• Heating circuit digital pressure gauge (system pressure indication on the display)
• Electronic thermometer

• peso: 35.0 kg
• marca: Argon
• modello: argo-condensy