Magnetic dirt separator under the boiler RBM MAG-NET compact series 3892 3/4"

Magnetic dirt separator under the boiler RBM MAG-NET compact series 3892 3/4"

CONSTRUCTION FEATURES

• Cartridge holder body: Polyamide PA66 + 30% FV
• Filter cartridge: AISI 304
• Hydraulic seals: EPDM PEROX

Magnets:

• B (Tmax) / B (Tamb)* < 1% (where Tmax = 130°C, Tamb = 21°C)
• Tested according to IEC 60404-5 & ASTM A977
• Neodymium
• REN35 B= 11000/12000 Gauss

Attacks:

• System return: M 3/4'' Flat seat
• Boiler inlet: 3/4” swivel nut. Flat seat
• UNI-EN-ISO 228

TECHNICAL FEATURES

• Compatible fluid: Water, water + glycol
• Max. pressure exercise: 3 Bar
• Working temperature: 0÷80°C
• Standard filter filtration level: 800 µm

RBM mag-net

• Supercompact
• Interception system included
• High efficiency
• Eliminates impurities
• Fights corrosion
• Extends the life of the boiler
• It guarantees the efficiency of the system

DESCRIPTION OPERATING PRINCIPLE

Through its effective and constant action, the magnetic filter collects all the impurities present in the system, preventing their circulation within it, thus avoiding wear and damage to the rest of the system components, in particular circulators and heat exchangers. heat. Mag-net exerts a continuous protection action on the boiler

USE

It is recommended to install Mag-net on the return circuit, at the boiler inlet, to protect it from all impurities present in the system, especially in the start-up phase. Thanks to its compact dimensions, it finds application under the boiler in domestic systems, where the installation spaces are very limited and therefore a traditional dirt separator would not find a place.

FILTRATION DEGREE

Mag-net removes magnetic and non-magnetic particles that can cause damage to the installation during the first day of operation. The continuous passage of the fluid through the filter during the normal operation of the system in which it is installed gradually leads to the complete removal of the dirt.

FILTRATION PRINCIPLE:

Through a forced path the fluid is forced to pass through the meshes of the filter cartridge (800 µm) and enter the filtration chamber.
In this filtration chamber through the simultaneous action of:

- filter cartridge (direct mechanical filtration)
- magnet
- design choices regarding the filtration chamber section the water loaded with debris undergoes a filtration treatment.

First of all, the sudden change in section (the filtration chamber has a larger diameter than the duct) slows down the motion of the fluid and consequently the speed of entrainment of the particles suspended in it.

Larger particles are stopped directly by the mechanical filter. The magnet, placed inside a cylinder positioned in the center of the
filtration chamber, attracts all impurities with magnetic characteristics.

Input flow
Filter cartridge
Magnet
Filtration chamber
Outgoing flow

In this way, all magnetic (ferrous residues) and non-magnetic (algae, mud, sand, etc.) contaminants present in the system are retained in the filtration chamber. The standard stainless steel cartridge has been designed not to exert excessive resistance to the passage of the fluid (low pressure drops) and acts through direct mechanical filtration without compromising the functioning of the heating/cooling system.

Product Warranty All products on sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

• peso: 5.0 kg
• marca: RBM
• modello: 3892.05.50