Daikin Mini Chiller Air Water Inverter Heat Pump EWYA-009DW1P 9 kW Three Phase R-32 Class A+++

• Cooling Capacity: 9.35 kW
• Heating Capacity: 9.37 kW
• Cooling absorption: 2.79 kW
• Heating absorption: 1.91 kW
• Air flow: 48 ~ 63 m ³ /min
• Water flow rate: 26.9 l/min
• Sound power level: 65.5 dB(A)
• Sound pressure level: 44 dB(A)

Electrical Data

• Power (V,Hz, Ø): 380~415/50/3
• Refrigerant gas: R32

• Cooling: -10° ~ 43°C
• Heating: -25° ~ 25°C

• Hydraulic pipe diameter: 25.4 mm (1") male
• Pipe connections diameter: 25.4 mm (1")

Dimensions and weight

• Dimensions (HxWxD): 1053x1500x650 mm
• Internal Unit Weight: 164 Kg

Daikin Mini Chiller Systems Small chilled or heated water production systems

Why the inverter?

The Inverter allows you to continuously modulate the power supplied by the compressor based on the thermal load requests, varying its number of revolutions. This principle, compared to traditional technology which divides the power into discrete steps of even high capacity, guarantees the end customer energy savings and better control of the operating parameters of the system. Most of the time, a building's cooling demand is less than the system's maximum load capacity. The larger the variations in annual load, the more vital it is to ensure that units are operating efficiently.

Energy Savings Absorption proportional to the power supplied

The Inverter offers, for the chiller as a whole, the possibility of significantly increasing its efficiency at partial loads, i.e. the condition in which, seasonally, the chiller will work most of the time, guaranteeing the best performance and reaching high values average summer seasonal yield ( ESEER ).

Furthermore, with the introduction of the European SCOP (seasonal COP ) indicator, the adoption of modulating systems and inverter technology makes it possible to optimize consumption even in winter, in line with the best requirements required by the new energy index.

What is SEER?

'Seasonal Energy Efficiency Ratio' ( SEER ) means the seasonal energy efficiency ratio of the unit representative of the entire cooling season, calculated as the reference annual cooling requirement divided by the annual electricity consumption for cooling purposes.

New parameter representing the seasonal efficiency of the product . The SEER value is calculated over a period of 2600 hours of operation during the year. Of these, there are only 30 hours of operation at full load.

Ideal Temperature Continuous adjustment of power and noise

The ability to work in modulation offers the guarantee of accurate control of the fluid temperature, regulated at a fixed point on the delivery to the system. This feature is ideal from the perspective of industrial application and precision temperature control, as it excludes the constant stops/starts of the compressors, responsible for electrical and mechanical wear. A further advantage is represented by the lower acoustic impact when compressors and fans operate partially, i.e. in conditions of lower demand for power output, while ensuring greater stability for the water temperature.

Lower System Costs Reduction of system water accumulation/content (-60%)

Thanks to the ability to react quickly to load variations, chillers that use Inverter technology can work correctly with a strong reduction in water content in the system (-60% compared to traditional chillers). This allows the thermal inertia to be reduced, with energy optimization and shorter commissioning times. This results in significant savings in system costs as the storage tank is no longer necessary.

Electrical advantages

From an electrical point of view, the Inverter introduces two great advantages:

Low inrush currents, considerably lower than the nominal operating current, on which a lower cost for the supply of electrical components to be installed depends

More power available when needed

The Inverter allows you to vary the power delivered; by powering the compressor at a higher frequency it is possible to reach maximum power values ​​higher than the nominal ones. This offers benefits in getting the system up to speed but, above all, it becomes an evident technical plus when the machine works in extreme operating fields. For example, traditional air-cooled heat pumps are usually combined with boilers to compensate for the efficiency deficit due to cold external temperatures. Inverter heat pumps can benefit from greater power when the environmental conditions require it, losing only 15% of yield in the transition from 7°C to -10°C of external air (in the case of ON-OFF the reduction would be ~40%), guaranteeing a water temperature of 50°C at all speeds. These advanced heat pumps can therefore be considered "primary", since they allow us to avoid the use of boilers.

Compressors developed and produced by Daikin

Daikin has always been at the forefront of the development of compression technology and now offers a complete range of swing, scroll, screw and centrifugal compressors. As a result, Inverter compressor control applies to our entire product range, offering greater comfort and ensuring a more efficient system

Scroll compressor for capacity control

Daikin's compact Scroll compressors are suitable for use with R32 refrigerant, to ensure consistent reliability and high efficiency throughout their useful life. Optimized for use in small and medium power systems, Scroll compressors are combined with air- and water-cooled chillers.

Characteristics:

› Simple, compact and robust

› Absence of valves and oscillating joint mechanisms, to guarantee maximum reliability

› Constant compression, to ensure a low level of energy consumption

› Greater compression efficiency thanks to the absence of volumetric re-expansion

› Low noise

› Low starting current

Advantages:

› Choosing an R32 product reduces the environmental impact by 68% compared to R410A and directly leads to lower energy consumption thanks to its high energy efficiency

› Chiller with Inverter

› Hermetically sealed inverter compressor

› New outdoor unit covering

› Separate MMI-2 controller for internal installation

Product Warranty: All products on sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.