Red 365 Energy COMPACT 45 45 kW pellet boiler

Technical features

• Model: Compact 45
• Product code: 7314001
• Heated volume: 990 ^m3
• Class: 5

Performance

• Nominal heat output at the hearth: 43.5 kW
• Minimum useful power: 11.47 kW
• Rated useful power: 40.3 kW
• Efficiency: 92.5 ~ 92.6%
• Outlet fume temperature: 80° ~ 140°C
• Maximum settable temperature: 80°C
• Maximum operating temperature: 95°C
• Recommended draft at minimum power: 0.05 mbar5 Pa
• Recommended draft at maximum power: 0.12 mbar12 Pa
• Smoke mass: 24.3 g per second
• Tank capacity: 150 litres
• Hourly pellet consumption: 2.6 ~ 9.0 Kg/h
• Autonomy: 11 ~ 38 hours
• Water content: 50 litres
• Maximum operating pressure: 3 bar – 300 kPa
• Air inlet hole diameter: Ø 100 mm
• Fume outlet hole diameter: Ø 100 mm
• Air intake: 100cm ²

Dimensions and weight

• Dimensions (WxHxD): 796x1335x764 mm
• Weight: 350.0 kg

Obligation to install anti-condensation valve

RED COMPACT 45 pellet boiler

Compact pellet boiler for small spaces, can be installed in the basement, closet, small technical rooms, etc. with high efficiency and wide operation modulation. Possibility of completing the hydraulic part with 4 different kits based on the needs of the system. Wide range of pellet loading and storage systems. Via the boiler panel it is possible to control the temperatures of the puffer and/or domestic hot water.

Compact in detail

• Programmable electronics that manage the boiler functions, including the chimney sweep function and summer/winter function.

• Large ash drawer for cleaning on a weekly basis

• Possibility of completing the hydraulic part with 4 different kits based on the needs of the system

• Charging tank supplied with a capacity of approximately 146 litres

Easy Clean

This particular version is equipped as standard with an ash compaction and evacuation system at intervals of up to three months. Equipped with a practical trolley to facilitate the operations of emptying and moving the ash, an automatic system for cleaning the turbulators and cleaning the brazier, via rotating grate or compressed air system. The Easy Clean version is completed by a "touch" panel for even easier and more intuitive control of the system.

---

It is strongly recommended to wash the entire system before connecting it in order to eliminate residues and deposits. Always install shut-off shutters upstream of the stove in order to isolate it from the water system if it is necessary to move it or move it, to carry out ordinary and/or extraordinary maintenance. Connect the stove using flexible pipes so as not to excessively tie the stove to the system and to allow for slight movements