JUNKERS HYDROCOMPACT OUTDOOR 12 Lt Water Heater Mod. WTD 12 AM EO Methane

Overview

GAS WATER HEATER JUNKERS HYDROCOMPACT OUTDOOR WTD 12 AM EO (12 LT) METHANE 2 - FORCED DRAFT Airtight Chamber Water Heaters: Junkers Hydrocompact Outdoor, the new compact, easy and fast outdoor water heater.

IN THE ABSENCE OF THE PRODUCT THE NEW THERM 5 600 SO 12 METHANE MODEL WILL BE SUPPLIED

Technical specifications

ACS energy efficiency class (ErP): A

Catalog code: WTD 12 AM EO

Profile of caricdichaiarato: M

Instantaneous gas water heater for external installation

Electronic flame ionization ignition

2 - Forced draft sealed chamber water heaters

Nominal heat output: 20.8 kW

Nominal heat input: 22.5 kW

Efficiency at 100% of rated power: 92%

Efficiency at 30% of nominal power: 94%

Water flow rate supplied with DT 25 C: 12 lt/min

Maximum operating pressure: 12 bar

Minimum operating temperature with antifreeze kit: -25C (standard)

Remote control: Standard

Display: multifunction LCD (remotely controlled)

degree of protection: IPX5D

Dimensions (PxWxH): 170x300x568 mm

Version: METHANE

List of features

Hydrocompact Outdoor: Compact gas instantaneous water heaters for indoors

Finally out! HYDROCOMPACTOUTDOOR the new water heater from the Junkers range specifically designed for outdoors: easy to install, simple to program.

Outside with peace of mind

HYDROCOMPACTOUTDOOR the new water heater designed for the outdoors which expands the offer of Junkers solutions for the production of domestic hot water. Thanks to the standard antifreeze devices and the IPX5D electrical protection rating, which represents one of the highest protection indices against water and dust infiltration, HYDROCOMPACTOUTDOOR resists cold (down to -25 C) and bad weather, without any further precautions.

Simple to install and control

Replacing your appliance with the new HYDROCOMPACTOUTDOOR has never been so simple! The new Junkers water heater, in fact, does not require any extraction and exhaust system. The absence of intake and exhaust pipes translates into minimal building work and extremely reduced installation times: in a single word, greater savings! HYDROCOMPACTOUTDOOR can be easily managed from inside the home, easily and intuitively, thanks to the large display of the remote control. With a simple click you can program the water heater and change the temperature of the hot water at any time, to always have the maximum desired sanitary comfort.

Small consumption, great performance

HYDROCOMPACTOUTDOOR is presented on the market with a 1 liter plus: the complete range, made up of 12, 15 and 18 l/min devices, allows all comfort needs to be satisfied, from the smallest to the most complex. Furthermore, thanks to the high yielding to the wide modulation range (1:7) the water heater is capable of adapting the gas consumption necessary to heat the water to the actual demand for sanitary withdrawal, thus guaranteeing all the sanitary comforts you desire maximum savings. Furthermore, HYDROCOMPACTOUTDOOR can be directly connected to solar thermal systems for the production of domestic hot water.

Characteristics:

Instantaneous water heaters, 2 - Forced draft sealed chamber water heaters, with electronic temperature control (stability ¤ 1C)

For external installations

It does not require extraction/exhaust systems

Resistant to cold and bad weather thanks to the antigel device (up to -25 C) and the IPX5D electrical protection degree

Yieldfinal 94%

Directly connectable to solar thermal systems for the production of domestic hot water, using a specific TWM 20 mixing valve

Management from inside the home, easy and intuitive, thanks to the remote control with large LCD displays for regulating the temperature and viewing information relating to the operation of the appliance

Installation flexibility thanks to compact dimensions.

Furthermore, installing the remote control is very easy: it is not necessary to open the product because the electrical connection cable is positioned outside the water heater.

Possibility of satisfying all comfort needs thanks to the complete range, consisting of 12, 15 and 18 l/min appliances

High sanitary comfort reduction of gas consumption thanks to electronic temperature control (stability ¤ 1C)

Reduction of consumption thanks to the wide modulation interval (1:7)

Elegant design

The ErP regulation and the new energy labels

The future of heating systems

Starting from 26 September 2015, heating systems for the production of hot water must comply with the ErP regulations issued by the European Union in order to be placed on the market. The ErP standards favor the eco-friendly design of products that consume energy from fossil fuels and aim to reduce energy consumption and CO2 emissions, as well as to provide consumers with transparent and homogeneous information on the energy efficiency of appliances, encouraging comparison. Regulations N 811/2013 and 812/2013 provide for specific energy labeling of appliances for heating and producing domestic hot water. Regulations N 813/2013 and 814/2013 prescribe, among other things, the minimum energy efficiency and polluting emission requirements that manufacturers of equipment for heating and the production of domestic hot water must comply with. These regulations therefore raise energy efficiency standards, improving the performance of systems and excluding less performing technologies from the market.

The energy label will be supplied by the manufacturer with the appliance and will represent a concrete help for the consumer, allowing him to better understand the characteristics of the system, acquire greater awareness of energy savings and allow him to choose the best thing to buy. The energy label will provide information on the energy class of the product, on a scale between A++ and G, and on other additional notations, such as power and noise emissions.

The ErP regulation provides two types of labelling:

the first is supplied by the manufacturer together with the product for the heating/domestic hot water production appliances

the second for systems composed of multiple elements.

In this second case, the label indicates the energy efficiency levels achievable thanks to all the components used, allowing the increase in the scores attributed to each appliance and increasing the energy class of the system: it is therefore the task of those who create/install the system to provide the consumer with the correct explanatory label.

The ErP standards represent an opportunity to develop a market for high efficiency technologies, such as condensation, heat pumps, solar thermal, cogeneration and the integration of different energy sources in a single system. These technologies will have an impact on home consumption, approximately 80% of which is due to heating and hot water production, and which are now incentivized at the fiscal level.

Junkers Bosch is already in line with the dictates of the ErP regulation, demonstrating the future orientation that has always characterized the brand.

Warranty

All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

• peso: 13.0 kg
• gas: Methane
• litri: 12
• marca: Junkers Bosch
• modello: SCALD_1412