RIELLO ACQUAFUN 14 LPG WATER HEATER

Overview

RIELLO ACQUAFUN 14 LPG WATER HEATER: Open Chamber Water Heater specifically dedicated to the production of hot water only.

Technical specifications

Product code: 20019747

Energy label specifications according to the European ErP directive

Sanitary energy efficiency: Class A

Load profile: profilL

Heating/DHW operation characteristics:

Useful power - hearth: 23.7 - 27.2 kW

Efficiency at max power: 87.1%

Open chamber, natural draft

Min/normal/max pressure bar 0.2/2/10

Campprelievselector max 40C: 6.7£13.6 l/min

Domestic hot water production: 14 l/min

Dimensions (hxwxd) 650 x 363 x 245 mm; 12.6 kg

Power supply: LPG

List of features

ACQUAFUN

LPG methane gas

Open Room

Automatic battery ignition

Acquafun Open Chamber water heater for quick and easy installation without electrical connections thanks to battery power. It is available in two models: 11 and 14 litres.

Characteristics:

Automatic ignition via battery (1.5 Volt). Avoid voltage problems.

Continuous flame modulation allows the selected temperature to be kept constant as the pressure and flow rate of the water varies, optimizing the combination of mechanical and thermostatic mixers.

Economizer device to reduce gas consumption.

Battery supplied (1.5 Volt €«¦ size C €«¦ half torch).

No mains connection necessary.

The economizer divides the maximum power by 50% to adapt it to the various installations.

Thanks to its particularly compact dimensions it can be installed in homes with particularly limited spaces.

ErP: Energy related Products

The new European regulations for heat generators

ErP is the acronym for "Energy related Products" (products connected to the use of energy) and the abbreviation that identifies the European ErP Directive 2009/125/EC, defined by the EEC with the intention of reducing the energy consumption of products through a environmentally friendly design ("eco-design").

The scope of this European Directive is extremely broad and up to now has affected products such as light bulbs, air conditioners, washing machines, fans, etc. Following the publication in September 2013 of a series of implementing regulations, starting from 26 September 2015 it will also apply to heating products for the production of domestic hot water.

From the same date, other regulations will also become effective which will implement the energy labeling of the same product families. The transitional period between the publication of the regulations and their activation throughout the European Community is necessary to allow full transposition of the contents by companies and market players.

Energy labeling of products for heating domestic hot water production

The regulations issued require that all products intended for heating and the production of domestic water, with a nominal thermal power lower than or equal to 70 kW, are placed on the market with an energy label that highlights their efficiency class.

Note: the regulation provides for the mandatory presence of the energy label for the release of the product from the factories to the market. All products previously placed, for example present near distribution warehouses, can be regularly marketed even if they do not have an energy label. Different energy labels have been provided based on the use of the generator used: for heating from A++ to G; for the production of domestic water from A to G.

A new mod to guide the consumer

The purpose of energy labels is to allow the consumer to easily identify the efficiency level of a product and to be able to carry out a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as 4 - Heat Pump Water Heater products, as well as air conditioners, the efficiency data reported for the average climate range.

In addition to product energy labels, European regulations also provide for the creation of a system label when creating a system in which various devices, components and controls operate.

This labelling, thanks to the combinations of the data of the different elements used in the system, will allow the creation of systems capable of reaching efficiency levels even higher than those of the individual generators. The European regulation provides that the system label must be made available by those who supply and/operate the system (sellers-installers); this faculty was also granted to builders.

Warranty

All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

• peso: 23.0 kg
• classe efficienza energetica: A
• gas: LPG
• installazione: VERTICAL
• litri: 14
• marca: Riello
• modello: SCALD_1205
• tipologia : OPEN ROOM