Technical features
- External Diameter Dimensions: 14 mm
- Thickness: 1 mm
- Roll Length: 50m
- Minimum Coating Thickness: 10 mm
- Burst Pressure: 32.06 MPa
- Operating Pressure: 8.01 MPa
- Water Content: 0.113 l/m
SMISOL® Frio Fears neither heat nor cold
It is the copper tube produced according to the EN 12735-1 standard (and ASTM B 68/M), and is pre-insulated in closed cell expanded polyethylene of regular dimensions and uniformly distributed (UNI EN 14114). It is distributed in rolls, having the dimensions of the pipe diameter in millimeters. The insulating sheath is produced in full compliance with the European Regulation EEC/EU 2037/2000 which requires the use of expanded insulating sheaths without the use of CFCs and HCFCs, gases harmful to health and the environment. The thickness of the sheath is also sized in such a way as to satisfy the multiple needs of this application sector. In consideration of the particular specificity of the field of use, special attention is paid to the external protective polyethylene film aimed at preventing the formation of condensation on the external wall of the product.
Internal surface
The internal surface of the copper tube is shiny, clean and dry , fundamental characteristics of a product normally available on the market for industrial use. This peculiarity allows us to obtain an integrated system with the terminal elements of the system. The particular internal cleanliness of SMISOL® Frio is safeguarded by closing the ends of each roll with caps, directly during the production phase.
External Protection
Closed cell expanded polyethylene covering with an average value of the resistance factor to the diffusion of water vapor “µ” greater than 15000 . The insulating sheath is produced in full compliance with the European Regulation EEC/EU 2037/2000 which requires the use of expanded insulating sheaths without the use of CFC and HCFC, gases harmful to health and the environment and has fire behavior class BL-s1-d0 according to EN 13501-1.
Coating Characteristics
- Thermal conductivity: λ ≤0.040 W/m°C.
- Average value of the resistance factor to water vapor diffusion “µ” greater than 15000.
- Average coating density: 33 kg/m3.
- Free from ammonia residues.
- Excellent resistance to external chemical agents.
- Non-flammable class BL-s1-d0 according to EN 13501-1
- Free from CFCs and HCFCs (Reg. EEC/EU 2037/2000)
Indications for Design
To avoid possible condensation on the pipe, it is necessary to check the environmental conditions in which the product is installed: relative humidity of the environment, temperature of the environment and of the fluid inside the pipe. In this regard, verification through the Psychrometric diagram is recommended
Fields of Use
- Refrigeration.
- Transport of heat transfer liquids for multifunction systems
Product Warranty: All products on sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.
